Loading

Prev Menu Next
Nodal Ninja Quick Reference Guides

Accessories

Camera Plate C2


Camera Plate C2
Camera Plate C2 works for cameras compatible with Canon BG-E3, BG-E5, BG-E8 or BG-E9. These include Canon 60D, 350D, 400D, 450D, 500D, 550D, 600D, 1000D.


Camera Plate C2
Install the anti-twisting pin to the appropriate position according to the number prescribed below. Then carefully align it to the corresponding socket at the camera base. Tighten the 1/4" screw slowly while keeping the pin in alignment. Be careful not to overtighten. Check that the camera plate sits snugly to the camera base when finished.


Camera Plate C2
Optional Feature:
If the QR clamp being used does not have a saftey pins, you can use the M3 Safety Stop Screws. Install the M3 screws at each end of plate making sure to use the black plastic washers as spacer.


Camera Plate C2

Only buy from authorized resellers. If buying new from other than an authorized reseller, no warranties or product support are included.

© 2017 Nodal Ninja ®