Loading

Prev Menu Next
Nodal Ninja Quick Reference Guides

Advanced Rotators

Rotator Mini


Rotator Mini (RM) is a compact and low-cost alternative for Rotator D4 / D5. It features fully lubricated bearings, interchangeable detent ring, and a rotator lock screw for use atop a pole. It works for Nodal Ninja Ultimate R1/10, R10 QR clamp, QRC-35, Nodal Ninja RS1, and Rotator Footplate.

Package Contents of Rotator Mini


Click to enlargePackage Contents of Rotator Mini
Spare Parts Qty
3/8" to 1/4" adapter 1
2mm hex key 1
M4 x 5 set screw 2



Features


Features of Rotator Mini


Installing Nodal Ninjas, QR Clamps or Footplate on RM


Click to enlargeInstalling Nodal Ninjas, QR Clamps or Footplate on RM
Install Nodal Ninja Ultimate R1/10, R10 QR clamp, QRC-35, Nodal Ninja RS1, or Rotator Footplate on Rotator Mini by means of two M5 flat head screws, which are supplied in the corresponding package. For best appearance, choose an orientation so that the text markings is at a less visible position.


Changing Detent Ring for Rotator Mini


Click to enlargeChanging Detent Ring for Rotator Mini
Loosen two set screws on the detent ring till it can be removed from the rotator. On new detent ring, apply a thin layer of grease to the area indicated. Loosen set screws so that it can be mounted on the rotator. Clean the grease on the old detent ring and store it safely for future use.

Changing Detent Ring for Rotator Mini
Turn the top part of the rotator to roughly align sockets A to the detent click ball. Mount the new detent ring. Align the set screws to the click ball. Press the ring firmly near the click ball. Tighten the set screw. Press the ring firmly near the other set screw. Tighten the set screw to finish the operations.

Only buy from authorized resellers. If buying new from other than an authorized reseller, no warranties or product support are included.

© 2017 Nodal Ninja ®