Loading

Prev Menu Next
Nodal Ninja Quick Reference Guides

R1/R10

R10 NPP for Sigma 8mm F3.5 Canon and Nikon


QR Clamp on R10

QR Clamp Pointing Left



Pano Head:R10 ONLY
Lens Ring:LR1 with LRP40
Lens:Sigma 8mm f/3.5 EX DG Circular Fisheye for Canon
Tilt anglea

LRP NPP value

2 Shots Aroundb3 Shots Aroundb4 Shots Around6 Shots Around
+10° - -
+7.5° - 1.05 0.825 0.675
+5° -
+2.5° -
?C
-2.5° -
-5°
-7.5° -
-10° - -
Remarks:
a - each R10 supports 0° and +/- tilt specified by the model.
b - requires full frame sensor or APS-C sensor with 60° roll.
c - reinstall the QR clamp with handle pointing right to reduce nadir footprint.



Pano Head:R10 ONLY
Lens Ring:LR1 with LRP40
Lens:Sigma 8mm f/3.5 EX DG Circular Fisheye for Nikon
Tilt anglea

LRP NPP value

2 Shots Arounda3 Shots Arounda4 Shots Around6 Shots Around
+10° - -
+7.5° - 1.65 1.4 1.275
+5° -
+2.5° -
?C
-2.5° -
-5°
-7.5° -
-10° - -
Remarks:
a - each R10 supports 0° and +/- tilt specified by the model.
b - requires full frame sensor or APS-C sensor with 60° roll.
c - reinstall the QR clamp with handle pointing right to reduce nadir footprint.

Note that the value correspond to QR clamp with marking in line with the safety pin. In the very first batch of R1, the marking is at the middle of clamp and will need +0.25 correction if the QR clamp in pointing left, or -0.25 correction if the QR clamp is point right.

Only buy from authorized resellers. If buying new from other than an authorized reseller, no warranties or product support are included.

© 2017 Nodal Ninja ®